Show'em Off!!! Post up 97-03 trucks!
Senior Member
Looks great! You shouldn't need worm clamps on the smaller hoses, I would remove them, looks cleaner when you do. It shouldn't leak as they are made to form fit tightly. Perhaps spin the air box clamps downward, so you don't notice the clamp screws so much. Some little details you can do.
Last edited by Jbrew; 01-20-2018 at 04:28 PM.
Senior Member
iTrader: (1)
Now an XLT in Colorado
Looks great! You shouldn't need worm clamps on the smaller hoses, I would remove them, looks cleaner when you do. It shouldn't leak as they are made to form fit tightly. Perhaps spin the air box clamps downward, so you don't notice the clamp screws so much. Some little details you can do.
You don't absolutely need them, because your intake isn't under pressure, but these look better, and should be used with any Silicone couplers.
EDIT: Clamps like these and black silicone couplers (which in my opinion would look *much* better than the red ones) can be had at www.siliconeintakes.com. They're here in Colorado Springs, and I bought stuff for my Mustang a few years ago. Good people and good stuff.
Nice job on all your powder-coating. Everything is looking really good!
..
Last edited by OhioLariat; 01-21-2018 at 01:48 AM.
Originally Posted by 02_Black_On_White
Going out for a stroll this evening Attachment 542787
Senior Member
iTrader: (1)
Zebra you took yours off?
Originally Posted by jprevat
Zebra you took yours off?
Senior Member
iTrader: (1)
If only I lived closer. Lol