Show'em Off!!! Post up 97-03 trucks!
Actually yeah! I'm gonna take it and the 4x4 logo's off and put some new ones on. May do a weird color like orange or something. Either that or a matte black.
Senior Member
The following users liked this post:
TylerD2116 (03-03-2014)
Senior Member
I want to do a matte black 4x4 logo on mine one day.
The following users liked this post:
TylerD2116 (03-03-2014)
Big Red
I can't wait to clean big red up but a few after the sun was going down. I'm gonna find some old pics to show you what my truck looked like a few years ago and the progress I've made...not a sticker person but found one that matches perfect
Big Red
[QUOTE="TylerD2116;3332593"]These are some pictures of how my truck has changed over the past 6-7 years. The top picture is as it sits now. Middle 2 are from college and then from a couple years ago.[/QUOTE
Nice truck...what size lift do you have on your truck? I'm glad to hear your doing away with the pin strip it will make a big difference. What size tires are you running?
Nice truck...what size lift do you have on your truck? I'm glad to hear your doing away with the pin strip it will make a big difference. What size tires are you running?
Resident light whore
This forum got me started!
Hey, a year ago I went through every page of this forum and pieced out my perfect kit. Now, I sold my truck. I may get another in due time. But, I'd rather just get some of my money back for the kit, so it's up for grabs. It's the RCD 2wd suspension lift. The RCD Traction Bars and other odd stuff like steering stabilizers. If you want it, I'll make a deal. No trucks for me for a wheel, I got stuck with a car for a while.. The kit is new, I'm in Cape Coral Fl, and can ship if needed. Also, I watched these forums carefully and as a new member, i plan to stick around. I can answer a ton of questions if needed about the 4.6, suspension parts for instance Moog Problem Solvers vs Crappy Dorman, etc. I've learned alot and want to give back!
about my parts that I wish to get rid of,
You get,
NEW 6' RCD crossmember / suspension lift kit which contains front traction bars, Front crossmembers, front coil springs, 2 lift spindles, 4 bilsteen shocks, 2 lift blocks, hardware, and instructions. Costed me $1400
NEW RCD rear traction bars. Costed my $779 ($480 plus brackets and shipping)
NEW 5/1 rear leafs came as 4/1 and had installed an extra 1.5 lift fabtech add a leaf. Costed me about $440
NEW Rancho RS5567 Steering Damper / Stabilizer. Costed me bout $120
Plus, I'll throw in 2 NEW Daystar 1.5 in coil spring spacers, and 2 extra NEW Pro-Comp lift blocks which are an inch and a half higher than the 2in RCD blocks to give you a total lift of 7.5 inches. Just use the RCD blocks as paperweights and use the Pro-Comp.
This kit costed me about $2800 bucks and I have all proof of purchases.
BUT IN ALL REALITY I'LL NEVER GET MY MONEY BACK, But a a decent percentage will be nice.
about my parts that I wish to get rid of,
You get,
NEW 6' RCD crossmember / suspension lift kit which contains front traction bars, Front crossmembers, front coil springs, 2 lift spindles, 4 bilsteen shocks, 2 lift blocks, hardware, and instructions. Costed me $1400
NEW RCD rear traction bars. Costed my $779 ($480 plus brackets and shipping)
NEW 5/1 rear leafs came as 4/1 and had installed an extra 1.5 lift fabtech add a leaf. Costed me about $440
NEW Rancho RS5567 Steering Damper / Stabilizer. Costed me bout $120
Plus, I'll throw in 2 NEW Daystar 1.5 in coil spring spacers, and 2 extra NEW Pro-Comp lift blocks which are an inch and a half higher than the 2in RCD blocks to give you a total lift of 7.5 inches. Just use the RCD blocks as paperweights and use the Pro-Comp.
This kit costed me about $2800 bucks and I have all proof of purchases.
BUT IN ALL REALITY I'LL NEVER GET MY MONEY BACK, But a a decent percentage will be nice.