Im having new monroe reflex shocks installed right now, im thinking of a steering stabilizer also but they have to order it. before i order one what would fit a 2001 f150 xlt 5.4l fx4 with a stock suspension and torsion bars cranked? all i can find are stabilizers that fit lift kits... any help would be great i have 35 inch tires and im thinking of going down to 33" i do mostly highway driving and not off road but i like the beefy look and my pro comps are a little much would yokohama geolanders be a beter buy? what do you all think?

 

Why do you need the stabilizer? Does your truck get squirrely on the highway after you hit a bump?

 

ya, i had the front end checked out and its all solid but to reduce the shimmy of the steering wheel they suggested a stabilizer. im going to try out the new shocks and see if they make a difference. my shocks are stock with 113k miles on them so its about time to replace them.

 

now they say the shocks wont fit because of the torsion bar crank, he says they are always extended and dont absorb the inpack of a bump. can i get shocks from a lift kit say rancho and fit those in there? what do guys do with a leveling kit? whats my way around this without putting in a lift kit? i need to stop this shake and shimmy.

 

Here you go. These are what you need, they are made for this type of application.

http://www.summitracing.com/parts/MRG-1290/

 

ok i ordered them and im picking up 4 315/70/17 bfg a/t for 250 total so hopefully this will correct the problem any other information i should know befor i head to the shop next week?