Shift Fork Replacement
#1
Senior Member
Thread Starter
iTrader: (1)
Shift Fork Replacement
I finally got my new shift fork in and was wondering if anyone on here has changed one before?
I have been reading a lot of contradictory information out there. Do I keep the pass. wheel on? Remove sway bay link? Drop the differential?
I have been reading a lot of contradictory information out there. Do I keep the pass. wheel on? Remove sway bay link? Drop the differential?
Last edited by jprevat; 07-17-2015 at 06:50 AM.
#4
Senior Member
Thread Starter
iTrader: (1)
Shift Fork Replacement
If I had access to air tools I would but I will be doing this old fashioned.
Do I need to remove the pass tire and cv to pull the pass side axle tube?
Thank yall for the replies.
Do I need to remove the pass tire and cv to pull the pass side axle tube?
Thank yall for the replies.
#5
Senior Member
Thread Starter
iTrader: (1)
Shift Fork Replacement
Well I ended up unbolting the front diff mount, ps axle tube frame mount, cv shaft, took out the sway bar link, and unbolted the axle tube from the diff. I had to use a chisel to seperate it though.
It took me about 4.5 hours with only hand tools in my driveway.
It took me about 4.5 hours with only hand tools in my driveway.