Retrofit build (old build)
#1
@naughtyfords on ig
Thread Starter
Retrofit build (old build)
I got hate when I first got on this forum about having hid in a reflective housing so I got some advice and retrofitted my headlights.
I don't remember all of the details of what I used if you look on the forum you will defiantly find most answers if you have questions. Just thought I would show off what I built!
Also (a little product placement) on the Instagram @naughtyfords there are naughtyfords decals for sale 2$ a piece free shipping. Thanks for taking time to read this.
I don't remember all of the details of what I used if you look on the forum you will defiantly find most answers if you have questions. Just thought I would show off what I built!
Also (a little product placement) on the Instagram @naughtyfords there are naughtyfords decals for sale 2$ a piece free shipping. Thanks for taking time to read this.
The following 2 users liked this post by NaughtyfordsIG:
blupupher (09-23-2016),
DrillRig52 (09-25-2016)
Trending Topics
#8
will run you OVER
get the mini H1 complete kit. I believe any shroud will work.
Besure to get the harness with the 9007 plug, so it will plug into your factory harness.
price: $270
get ya some headlights with clear lenses, depending on the ones you get they're $30-80.
Throw the headlights in the oven, ~225 degrees F for 10ish minutes and pry it apart.
One the lense is off (now would be the time to paint the insides) bolt the projector in it.
RTV silicone the lense back on and plug it all in.
EASY!
The following users liked this post:
goldensloth (09-26-2016)
#9
go to theretrofitsource.com
get the mini H1 complete kit. I believe any shroud will work.
Besure to get the harness with the 9007 plug, so it will plug into your factory harness.
price: $270
get ya some headlights with clear lenses, depending on the ones you get they're $30-80.
Throw the headlights in the oven, ~225 degrees F for 10ish minutes and pry it apart.
One the lense is off (now would be the time to paint the insides) bolt the projector in it.
RTV silicone the lense back on and plug it all in.
EASY!
get the mini H1 complete kit. I believe any shroud will work.
Besure to get the harness with the 9007 plug, so it will plug into your factory harness.
price: $270
get ya some headlights with clear lenses, depending on the ones you get they're $30-80.
Throw the headlights in the oven, ~225 degrees F for 10ish minutes and pry it apart.
One the lense is off (now would be the time to paint the insides) bolt the projector in it.
RTV silicone the lense back on and plug it all in.
EASY!