Thanks for all the help so far!! Do I need a harmonic balancer sleeve?? I've seen it pop up several times next to the harnonic balance when looking at them online. COLLIN- are you suggesting using the flywheel teeth to brace against while removing the bolt??

 

Unsure on the sleeve thing. Yep I used a big screw driver. If you can get a helper it will make it SO much easier. I did it alone.

 

this is what i did to remove the bolt you need a strong arm and a 18 mm rest it against the frame and bump the key that easy to keep your puller from turning ya can stick a big screw driver between the bolts of the puller the bolts threads for the puller are standard thread

 

Will the balancer leak oil? Or fluid when it does this?

 

Nope