Anyone ever installed a remote ignition system, and if so is it extremely difficult or an easy job?
I can turn a wrench as good as the next guy, but just wasnt sure if I wanted to attempt this since Ive never done one before.
I have a 98 F-150, 4.6, without alarm, or keyless entry, so I would be getting a kit that includes both, if I were to do it myself.
A local shop wanted $330 to do the job, but I could get a nicer system, and do it myself, for around $150.
Also for those that have done this install, which system/brand would you recommend?

 

yes, its not hard if you take your time.

search for remote starters on here, I have covered it a few times, and posted a stsp by step how to, and a wiring diagram.

 

Thanks Ty, I should have tried that first,, my bad.

 

Did the search, but this is all Im finding... https://www.f150forum.com/search.php?searchid=82546

Ive looked through the posts, and havent seemed to find any of the info you mentioned.

 

i did mine on my 97, it went pretty easy, but i dont have the theft sensor in my key. i did on my 99 explorer, but it wasnt too hard to hook up the bypass.