Remote start help!
Thread Starter
Member
Joined: May 2016
Posts: 33
Likes: 2
From: tennesee
Remote start help!
Hey everyone I just installed a remote start in my 1997 F150 and I'm having a few nit picky issues. Here's what the problems are:
1. I don't have running lights when I believe I have the right wire. (The solid brown wire on the back of the light switch)
2. I can't seem to fine the dark blue wire for the horn. There's a million blue wires under here.
3. When ever I remote start the truck I can't shut it off with the key.
I.e. *Remote start* *put key in and put to on* then I go to turn off the truck via the key and it doesn't shut off.
There are two yellow wires that connect to 2 red wires. The two yellow wires are connected together from factory so I connected both red then connected them to the two yellow. Does the 2 yellow wires need to be seperated?
1. I don't have running lights when I believe I have the right wire. (The solid brown wire on the back of the light switch)
2. I can't seem to fine the dark blue wire for the horn. There's a million blue wires under here.
3. When ever I remote start the truck I can't shut it off with the key.
I.e. *Remote start* *put key in and put to on* then I go to turn off the truck via the key and it doesn't shut off.
There are two yellow wires that connect to 2 red wires. The two yellow wires are connected together from factory so I connected both red then connected them to the two yellow. Does the 2 yellow wires need to be seperated?