putting in expedition seats need help
 

hi there im putting 99 expedition electric seats in my 98 reg cab none electric so im going to have to run my own wires my ? is i dont know what wire goes to what i cut the old wire past the plug in clip and so i had plenty of wire on the

drive side seat there is four wires red black white and green

passanger seat is red black and white i plan on tapping in to my fuse box to get my hot wires inless there is a better place
thanks Dustin

Here's your schematic for the wiring for your power seats for 98=99 F series. Hope you can work it out. The colors you described are the same for both years.

thanks for getting that found out the motors where bad so what i did was switch the seat base out with my old manual works like a charm and i didnt have you hunt down wires will post pic later oh i all got the center console and all the brackets to put in my truck

If you ever feel like replacing your motors just wire it rite to the battery. Throw a small fuse on too. That's what I did on mine. Not realy as clean in the engine bay but its a whole lot easyer.