panel removal on 3 door
Front door:
1. disconnect bat
2. remove the window crank if manual windows, if power pry the controll panel off the arm est and disconnect it from wiring harness
3. pry of side mirror and door pillar panels
4. detach retaining clips under removed panels
5. pry off door handle cover and detach door handle
6. then just gently pry off the door panel from the door using a putty knife or thi screw driver starting from the front and working back.
7. lift panel up and out to remove
install in reverse order.
Have never done the rear doors, but i imagine it is similar.
1. disconnect bat
2. remove the window crank if manual windows, if power pry the controll panel off the arm est and disconnect it from wiring harness
3. pry of side mirror and door pillar panels
4. detach retaining clips under removed panels
5. pry off door handle cover and detach door handle
6. then just gently pry off the door panel from the door using a putty knife or thi screw driver starting from the front and working back.
7. lift panel up and out to remove
install in reverse order.
Have never done the rear doors, but i imagine it is similar.
I have i had mine off and im not quite exact on the instructions, but u have to take the 3 screws out of the window bracket and than the couple of screws that hold the bottom piece in and than u can lift the bottom part up and it comes right off.

