painted up the rig, more to do.
#1
Member
Thread Starter
Join Date: Oct 2010
Location: Florida
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
painted up the rig, more to do.
painted the front and back bumpers black with duplicolors black chrome. painted almost every plastic part with krylon fusion black to restore that black beauty. painted up the exaust. got some new body side molding. still gotta paint the rims and fender flares!
#3
How'd that black chrome work out for you? I've been considering blacking out my rear bumper but not sure about DIY painting the chrome.
Looks good, once everything gets painted throw a little tint on the windows should tie it all together.
Looks good, once everything gets painted throw a little tint on the windows should tie it all together.
#4
Member
Thread Starter
Join Date: Oct 2010
Location: Florida
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
it came out pretty good. had a few runs because i got too ancy but i just sanded it down and repainted it. so far so good tho! ya i got a window tint gift certificate for christmas so ill be doing that soon.
#5
Senior Member
Now replace that 3rd brake light with a smoked one! I just got one off ebay this week and it changed the looks. I'm planning on doing the same thing you have done, only my truck is already black (2tone), so the window surround is going to be the first try at paint, was thinkin' of using the Krylon fusion for plastics seein' as it worked well on my supermoto.
By the way, I like the color combo, looks sweet!
Link for the 3rd brake light set...97-03 FORD F150 F-150 SMOKE LED 3RD THIRD BRAKE LIGHT (110630662207)
By the way, I like the color combo, looks sweet!
Link for the 3rd brake light set...97-03 FORD F150 F-150 SMOKE LED 3RD THIRD BRAKE LIGHT (110630662207)
Last edited by FL_F150; 01-08-2011 at 04:30 PM. Reason: text add
#7
Member
Thread Starter
Join Date: Oct 2010
Location: Florida
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
awesome thanks for the advice! ill prob do the niteshades. as far as painting rims black i wanted to use duplicolor products as well but no local autozones or anything carry the wheel paint. anyone have a decent paint to recommened for doing a good job on the rims. i have all the other supplies needed to sand it down and clean em up real good.
Trending Topics
#8
x2
Night shades on the 3rd is what I did, that and LED replacement bulbs and you'll still be under the cost of an aftermarket light I think. I also Night Shaded my ovals, but I went a little to dark on them, just food for thought. If you don't want to worry about tickets for tinting your tails you could also paint the insides black to make them appear a little darker with out losing visibility. Try calling around to local paint shops, they might be able to sell what you need in rattle cans for your rim job. (couldn't resist)
awesome thanks for the advice! ill prob do the niteshades. as far as painting rims black i wanted to use duplicolor products as well but no local autozones or anything carry the wheel paint. anyone have a decent paint to recommened for doing a good job on the rims. i have all the other supplies needed to sand it down and clean em up real good.
Last edited by My01SCrew; 01-08-2011 at 07:29 PM.