Oil Hose
03-03-2013, 08:22 PM
#1
Junior Member
Thread Starter
Oil Hose
there is a hose with a part on it coming out of the place you put oil into. It is making a noise that sounds like it needs replaced. I have no idea what it is called or what it is. I just finished up changing my plugs and had to pull this out to get to my #3 and #4 plugs. It is making a noise, checked everything else and it is fine please help so I can get a new one or is there a way to stop it from making the noise?
03-03-2013, 08:30 PM
#2
Yes, you can fit 33's!
Its your PCV valve. Is it comin from the hose itself or where it plugs into your valve cover? If its just the PVC valve its around $3-4 at and auto parts store. If its the hose itself, probably gonna have to go to the stealership.
The following users liked this post:
Akson40 (03-03-2013)
03-03-2013, 09:29 PM
#5
You're gonna want to replace the whole hose. The valve is actually part of the hose. Dealership cost is about 40 bucks. Just pull both ends out and put the new one in.
03-03-2013, 09:44 PM
#6
Yes, you can fit 33's!
http://m.autozone.com/autozone-mobil...gd7h?id=830765
If the hose is alright you won't have to replace it. And no the valve is not part of the hose, its connected to the hose.
If the hose is alright you won't have to replace it. And no the valve is not part of the hose, its connected to the hose.
03-03-2013, 10:00 PM
#8
Yes, you can fit 33's!
No they're 2 separate pieces, wasn't trying to sound like a ***** btw. Just tryin to save the op some cash. A motorcraft pcv is around $10 and the hose is like $30-35 round here. The link I put on is for an 01 F150 5.4, don't know why it didn't list that info
The following users liked this post:
Akson40 (03-10-2013)
03-10-2013, 05:18 PM
#9
Junior Member
Thread Starter
I was told that they are 2 separate pieces as well, but This is on tight. Looks nothing like the one I have. All in all I will take the whole thing off and try to separate them. My PVC was rattling so hopefuly this will stop it from making noise. Thanks again to everyone
03-10-2013, 05:29 PM
#10
2012 member
Eh I don't know what yours looks like but my hose separated from the Pcv valve when I changed mine yesterday just took a lot of wiggling. The valve was a $2 part at auto zone. It just pushes into the valve cover with pressure. Try breaking it loose and wiggling before throwing away 40$. I've got a 99 5.4L
The following users liked this post:
Akson40 (03-11-2013)