no turn signals or overhead console
#1
Junior Member
Thread Starter
no turn signals or overhead console
Hello all, if anyone followed my no start saga then you know I have now solved that, which leads me to fixing the original issue.
I replaced my fuse panel due to water corrosion. Everything worked great for a few weeks. One morning i was driving, turn my turn signals on and they flashed quick for a few seconds then quit. I also noticed the overhead display went out at the same time. made it to work and back home. I have emergency flashers working, I replaced the relay just in case. I have checked all bulbs and all are good. Pulled my multi function switch to be sure and everything checks out with the meter. Even if that went bad it doesn't explain why the overhead display also went out.
Does anyone have any ideas?
Thanks for all the help here!
I replaced my fuse panel due to water corrosion. Everything worked great for a few weeks. One morning i was driving, turn my turn signals on and they flashed quick for a few seconds then quit. I also noticed the overhead display went out at the same time. made it to work and back home. I have emergency flashers working, I replaced the relay just in case. I have checked all bulbs and all are good. Pulled my multi function switch to be sure and everything checks out with the meter. Even if that went bad it doesn't explain why the overhead display also went out.
Does anyone have any ideas?
Thanks for all the help here!
#3
Junior Member
Thread Starter
#4
Senior Member
Did you check for power up in the console? That's next. If it's present, you probably have a ground issue.
#5
Junior Member
Thread Starter
The following users liked this post:
white89gt (08-07-2020)