Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Need Some Suggestions

Thread Tools
 
Search this Thread
 
Old Jul 25, 2012 | 08:55 PM
  #1  
itsryan7290's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 23
Likes: 0
Default Need Some Suggestions

Hi guys I bought an 02 f150 xlt supercrew from my dad recently and am looking to put alittle bit of money into it to make the overall appearance alittle more appealing. I'm actually a beginner when it comes to customizing trucks so I need your guys help.


I was thinking about ordering these HIDS

http://www.ebay.com/itm/140762266970...84.m1423.l2649

with this HID kit

http://www.ebay.com/itm/xeno-HID-KIT...vxp=mtr&_uhb=1

but i wanted to know what you guys thought of the appearance. I also want to install a new grille in the front but Im completely clueless on this and open to more suggestions.

Im going to attach a front and side view of the truck and listen to all reccomendations.




Reply
Old Jul 25, 2012 | 09:19 PM
  #2  
Jason Schulte's Avatar
Junior Member
 
Joined: Nov 2011
Posts: 28
Likes: 0
From: Lubbock, Texas
Default

In the pictures I uploaded I had a 1.5" leveling kit installed which for the most part leveled it off. I did just put some heavy duty shocks in the rear which lifted it 2" and am going in friday to have a 2.5" leveling kit installed. I will post pictures after it has been done. I also have it tuned and dual exhaust dumped with glass pacs. I also bought a new grille, fog lights and a new bumper.
Attached Thumbnails Need Some Suggestions-imag0058.jpg   Need Some Suggestions-imag0060.jpg  
Reply
Old Jul 26, 2012 | 08:22 AM
  #3  
itsryan7290's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 23
Likes: 0
Default

Thanks for the response and I pmed you about the grille.


Does anyone else have suggestions. I'm mostly looking for suggestions for the lights and grille
Reply
Old Jul 26, 2012 | 12:15 PM
  #4  
rynbrdnr's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 318
Likes: 4
From: Holyoke , Mass
Default

First of all get rid of the grill and go billet. Remove the door bumps and plastic dip your wheels
Reply
Old Jul 26, 2012 | 12:25 PM
  #5  
rynbrdnr's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 318
Likes: 4
From: Holyoke , Mass
Default

All of these are fairly cheap. Home depot sells plastic dip and the doors bumps can be taken off with a set of bondo spreaders and some heavy fishing line. They sell billet grills on eBay cheap, anywhere from 50 to 150 bucks
Reply




All times are GMT -4. The time now is 03:34 PM.