cuda replaced the whole a arm for $40

 

well it cost 150 for a arm down here

 

http://www.autozone.com/autozone/cat...uestid=1478939

 

ok well this thing as been a b and a half i went ahead and burn them the tool didnt work for me so now tmr i got to go buy new sleeves because my kit didn't come with them but im never doing bushings again this as just pissed me off do not buy the kit from energy suspension it missing half the parts

 

good luck man , sounds like u need it

 

Energy suspension says to save the outer shells when installing. They say to heat them and push the rubber part out. Then install their bushings.

 

well its all back together had to buy a control arm for 107 lower one and foud out that energy suspension sent the wrong kit cause my vin has a 6 in it and its the rarest one so its a b to find parts for but its all good and back together but way to much money ill just buy moog ones from now on

 

this was the reason i could not get it together i had the old style bolts and i could not get the end caps on the lower bushings how important is that. The bushing i got with the new control arm had a sleeve that was not long enough were no bushing would be touching the frame bracket

http://www.timskelton.com/lightning/...e_bushings.htm