Give me a second and I will post the writeup I used.

 

Is this the same one you used?bambi mod

 

Yes

 

Then I am at a loss. Do you have the solid yellow and solid brown wires?

 

Yes i do, Solid yellow in #5 pin, and brown in #12. I have 9 wires total just like the diagram.

 

That doesnt make any damn sense

 

Just to throw a question for my knowledge... Is this a factory plug and play system?/ with a two wire plug or one wire plug to the fog lights?

 

yea i know right. When you did this on your truck, do you think the **** as to be exactly where it stops on the fog lights? it was kinda hard to judge when i pulled the switch apart, it stops on the fog lights, but when i pull the **** out, it moves towards the headlights barely. I mean just a tiny TINY bit... But i can move from fogs straight to headlights with the **** pulled out with no problem. Surely that little bit wouldnt make a never mind...?

2 wire plug going to my fog lights.

 

Was going to suggest looking at grounds if it were a single wire connector...

 

I dont feel like that should matter