Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

lightning blower install

Thread Tools
 
Search this Thread
 
Old Mar 8, 2009 | 10:38 PM
  #1  
stock91lx's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 5
Likes: 0
Default lightning blower install

i am wondering if a lightning superchager will fit my motor. i have a 98 5.4. i know i will need the blower, lower intake, intercooler, midplate, heat exchanger, injector, mass air, tune, and the belt and pulley system. but i am wondering about the heads. is the blower for pi heads. what heads do i have?
Reply
Old Mar 8, 2009 | 11:19 PM
  #2  
cole_ford's Avatar
Bleeds FORD Blue
 
Joined: Sep 2008
Posts: 1,619
Likes: 4
From: North Dakota
Default

read this it should get ya started. Sounds like the block might be different. Do some more searching, you might find more than I did.
https://www.f150forum.com/f11/lighting-motor-my-02-f150-4x4-possible-16319/
Reply
Old Mar 8, 2009 | 11:24 PM
  #3  
stock91lx's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 5
Likes: 0
Default

the blocks are the same, i know the n/a 5.4 has a higher comp. ratio and non-forged pistons. but im wondering about the heads
Reply
Old Mar 8, 2009 | 11:42 PM
  #4  
cole_ford's Avatar
Bleeds FORD Blue
 
Joined: Sep 2008
Posts: 1,619
Likes: 4
From: North Dakota
Default

From what Ive been reading online, the heads are the same
Reply
Old Mar 9, 2009 | 01:50 AM
  #5  
stock91lx's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2009
Posts: 5
Likes: 0
Default

but are they non-pi or are they pi heads
Reply




All times are GMT -4. The time now is 04:28 PM.