I am leveling my truck and was told that a 2 inch coil spacer would be good and make the truck perfectly level. I was recommended to use a 3 inch coil spacer and then put a 1-1.5 inch block in the rear. I was told to use this. http://supremesuspensions.com/produc...eling-kit-2wd/ Does anyone have advice for installation? Like needed tools other than jack, jack stands, sockets set, and spring compresser

 

That's about it but i wouldn't do the three inch spacer. Am impact wrench may not be a bad idea

 

What's about a 2.5, that's all I can find is a 2.5 or a 3.

 

Here is the link from the other thread you started where we discussed a few things.

https://www.f150forum.com/f6/level-vs-lift-368966/

 

I remember that I was just checking to see what other people thought about it and what advice people have. Thanks for the help earlier

 

Gotcha...

No problem.