I have a 2003 F-150. Bought it used about 5months ago and decided i wanted to level the front end. Got under to tighten up the torsion bars and i have about 1.5 inchs of bolt thread on the passenger side and about half an inch on the drivers side. what do i do?!? Something has to be wrong!!!

 

is the truck level cause i know some trucks come with longer bolts on the passenger side

 

No its not level. i didnt know that they sometimes come with longer bolts. At the top of the key (like the arm) on the driver side i cant fit my finger there but on the passenger side my finger fits just fine. Any suggestions would be greatly appericated!

 

which side is higher... Which side is higher if its the driver side then your fine and just tighten em both up... if its the other then you may have a problem...

 

yeah it could be two different keys in there you may wanna take them out and look at them

 

The driver side has less thread than the passenger side. i havent touched them at all yet. I have 5 threads showing on the driver side bolt and about 1.5 inchs of thread on the passenger side. i dont really want to bottom out the bolt on the driver side but i want the truck sitting level.

 

i know thats what i mean aftermarket keys dont have to be turnt up as much your driver side could be a factory key you might wanna take them out and compare them