GOTTS write up
Thread Starter
Senior Member
Joined: Mar 2009
Posts: 182
Likes: 2
From: Laramie, Wyoming
GOTTS write up
Heres what i did for my GOTTS.
Go to ace, and buy a 3" rubberdrain pipe connector with 2 hose clamps already on it, buy 4" of 3" Black PVC thin wall. remove the stock rubber piece, heat up the black pipe with a hand torch, and trim it to fit the oblong shape in the fender. Clamp the rubber connector onto the filter housing. stick the pipe into the rubber connector about 2" and clamp down both clamps, then insert the piece of pipe into the fender snug, disconnect battery and elt sit for 4 hours, and you are done!!!
Go to ace, and buy a 3" rubberdrain pipe connector with 2 hose clamps already on it, buy 4" of 3" Black PVC thin wall. remove the stock rubber piece, heat up the black pipe with a hand torch, and trim it to fit the oblong shape in the fender. Clamp the rubber connector onto the filter housing. stick the pipe into the rubber connector about 2" and clamp down both clamps, then insert the piece of pipe into the fender snug, disconnect battery and elt sit for 4 hours, and you are done!!!