Front end problem
11-20-2017, 11:25 AM
#1
Junior Member
Thread Starter
Join Date: Nov 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Front end problem
1 have a 1997 f150 4x4 iI recently replaced my cv axels and wheel assembly hub and front disc brakes. When i began my road test the front passenger side seem to bind up.
So I put the front end on jack stands and noticed that the driver side tire spins freely but the passenger side will not. It locks up after half a rotation. It looks like the passenger side is binding up? When I drove it it felt the passenger side was going up and down so much so I dont think I can drive it at all safely.
So I put the front end on jack stands and noticed that the driver side tire spins freely but the passenger side will not. It locks up after half a rotation. It looks like the passenger side is binding up? When I drove it it felt the passenger side was going up and down so much so I dont think I can drive it at all safely.
Last edited by Srmviking140; 11-20-2017 at 11:37 AM.
11-20-2017, 12:48 PM
#2
Try this thread; https://www.f150forum.com/f6/brake-c...icking-379602/ My 98 had one side not releasing due to the inner and outer layers separating and not allowing the caliper to fully retract.