CEL went on took her to autozone got the codes for bank 1 and bank 2 too lean. only two codes from their scanner. Drove 20 seconds down the road to Advanced auto parts, their scanner pulled up 5 more codes.

P0171 Bank 1 too lean
P0174 Bank 2 too lean
B1676 Battery pack voltage out of range
C1226 Brake warning lamp ground short
C1198 ABS inlet valve coil left front circuit malf.
C1214 ABS inlet valve right front circuit malf.
C1185 ABS power relay output circuit malf.

Now the ones dealing with the abs... I replaced my brakes last month my rotors are pretty rough so I already have the new ones in my room ready to be put on. Just dont have a jack or jack stands so I use my friends, he is out of town. grrr. Anyway do yall think that some of the abs codes will go away after I change the rotors? I know the right front hub and bearing and all that has been rebuilt already last summer 2014. But there a thump thump thump sound and vibration coming from the front left when I drive. Now I hope when I change the rotrs it will go away. I might have to rebuild my hub. As far as the bank codes ive heard cleaning the maf sensor would help those go away. What do yall think and do any of you have any experience with any codes?

Thanks in advance

 

Generally the lean bank codes are from a vacuum leak or maf problem. Clean the MAF but do it the correct way and get a can of starting fluid and spray around your intake gaskets (thats where my problem was).