Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

code 1506

Thread Tools
 
Search this Thread
 
Old Apr 23, 2011 | 05:05 PM
  #1  
redneckfromnb's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 27
Likes: 0
Default code 1506

hey guys i got a 97 f150 and its got really hard on gas and its showing code 1506 ,what is it?theres also code 0171,0113,0174.im lost with all these codes.any help would be appreciated
Reply
Old Apr 23, 2011 | 05:27 PM
  #2  
re54drider's Avatar
Senior Member
 
Joined: Jul 2008
Posts: 187
Likes: 15
Default

Google OBD2 (insert code)
Reply
Old Apr 23, 2011 | 10:20 PM
  #3  
jchubb01's Avatar
Senior Member
 
Joined: Dec 2010
Posts: 287
Likes: 0
From: Detroit
Default

1506 - Idle Air Control Over Speed Error
P0171 System too Lean (Bank 1)
P0113 - Intake Air Temperature Circuit High Input
P0174 System too Lean (Bank 2)


Too lean means your getting more air than fuel.
Reply
Old Apr 24, 2011 | 10:35 AM
  #4  
redneckfromnb's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 27
Likes: 0
Default

so how or where do i start correcting these codes,the milage is really bad compared to my 99 dakota that has a 3.9
Reply
Old Apr 24, 2011 | 11:34 AM
  #5  
Mr B's Avatar
Pimp
 
Joined: Jul 2008
Posts: 332
Likes: 0
Default

What engine do you have? Sounds like you have a similar problem to what I just went through. It ended up being a bad IMRC actuator on the passenger side.
Reply
Old Apr 24, 2011 | 11:44 AM
  #6  
twilson16's Avatar
Senior Member
 
Joined: May 2009
Posts: 125
Likes: 0
Default

Mass Air Flow Sensor.... Your truck has to run like crap or barely run. Floor it and it bucks and shakes????
Reply
Old Apr 25, 2011 | 05:56 AM
  #7  
redneckfromnb's Avatar
Thread Starter
Junior Member
 
Joined: Mar 2011
Posts: 27
Likes: 0
Default

its got a 4.2 in it and it runs pretty good but it sounds like its flooding,give it some gas and it comes out of it sometimes.it does do the shaking thing though but once it has been running it starts right up
Reply




All times are GMT -4. The time now is 02:44 PM.