Hey guys. The bearings went in my a/c pulley. I know this is not uncommon. Has anyone changed theres. I was wondering if i needed to get the a/c clutch wrench set or if it were held on a different way.

 

I just replaced mine using a three jaw gear puller
it will reach behind the pulley and pull off the part that engages the clutch if your not carefull but if it does you can just tap it back on just make sure the plug goes back in the "grove"or it wont go on all the way.
as for putting it back on I just took a socket the size of the inner part of the bearing and taped it back on

dont forget to take off the lock ring
before trying to pull the pulley

 

Thanks old 98. My dad changed his and he said something about the snap ring. I wanted to make sure before I took it apart.