Break line help.
Senior Member
Joined: Nov 2017
Posts: 6,637
Likes: 1,292
From: Washington
Pretty sure it's called a "bubble flare".
There's seven pictures in this link. Click the little arrow.
http://www.fedhillusa.com/?page=flare
There's seven pictures in this link. Click the little arrow.
http://www.fedhillusa.com/?page=flare
5 Year Member
Joined: Sep 2017
Posts: 529
Likes: 115
Does anybody know the size or the length of the brake line from the master cylinder to the rear brake T where it splits off to go to the back two wheels I have the rear wheel drive version of the 97 F150 and I didn't know what size the fitting size because I've got a brake leak that is underneath my driver seat those lines are rusted anyway so I was just going to replace it all at once.
Slick
Joined: Feb 2018
Posts: 171
Likes: 6
From: USA
UPDATE: I went to local parts store and found a 3/8-24 to metric with 'bubble flare' . I am good to go and tonight, after my date with DW, I will finish the bending and crawl under the truck to finish install, then bleed the MS and lines at calipers. Ran it low on fluid so MS may need bleedkng.