I had some 295's put on my stock 01 supercrew 4x4 truck a short time back & I also cranked the bars up 1". Took it to the alignment shop & found out my lower ball joints were bad. I had a buddy replace them & while he was there he noticed the uppers were not in that good of shape either. So I had him replace them as well.

Yesterday I took it back to the alignment shop & they said they couldn't align it because it needed adjustable camber bolts. Is this normal? Where do I get these camber bolts from?

Thanks!

 

http://www.summitracing.com/parts/MOG-K8740/?rtype=10

 

my allighnment shop did it without that kit it's just alot harder

 

It can be done without camber bolts. They do make the process easier, however. A good experienced alignment tech shouldn't need them. It depends on the shop you take it to.

If you do want them, you can buy camber bolts at any auto parts store or through summit in the link above.

 

Thanks!

 

Simple to install... You can do it yourself.

 

I had the same problem 2 weeks ago. Needed an alignment and was told my upper and lower ball joints were going out. I took it to the dealership because they didn't need the adjustable camber kit and it still ended up being $1100 total The upper ones really suck because they have to replace the entire control arm...