97 4.6 firing order 4x4
03-23-2018, 07:19 PM
#1
Junior Member
Thread Starter
97 4.6 firing order 4x4
Maybe I just search with bad keywords but confused about firing order, truck I just bought has everything labeled wrong and online says 1-4 passenger side front to back 5-8 drivers side same.. another page shows wires crisscrossing everywhere on mismatched numbers? Thought all wires matched to ignition coil no matter what? Novice here.
03-23-2018, 07:39 PM
#2
Senior Member
63 72
15 48
Front of engine.
passenger side coil 1563 driver side coil 4872
2 wires from each coil go to each side of the engine.
15 48
Front of engine.
passenger side coil 1563 driver side coil 4872
2 wires from each coil go to each side of the engine.
Last edited by JCR 56; 03-23-2018 at 07:45 PM.
The following users liked this post:
Kenny Martin (03-23-2018)
03-23-2018, 07:41 PM
#3
Senior Member
You follow your firing order, nothing else matters except where the cylinders are. But you've proved you know that.
The following users liked this post:
Kenny Martin (03-23-2018)
03-24-2018, 10:22 AM
#4
Senior Member
If you are inquiring about this because you are changing your wires (and/or plugs) be cautious as to what you are putting on your truck. Motorcraft or Denso wires, and Motorcraft plugs are what these trucks like.
The following users liked this post:
Kenny Martin (03-24-2018)
03-24-2018, 01:39 PM
#6
Senior Member
Denso or Motorcraft are the best for coil packs as well. These truck really, really dislike anything but Motorcraft plugs.
