Cmanjr

Gotcha, I'll see if I can find the link to the ones I bought, if not I'll try finding ones darn similar for ya.

Fordgirl83

So this is all the information I need to switch over to led lights in a 2002 f150 lariat edition it I want to have red led interior lights

Fordgirl83

Can someone tell me the led bulb size for the dome light door light and the light above the 2 back passenger doors in a 2002 f150 lariat edition

dakotadave

Great info here! LEDS are brighter and last longer!

Fordgirl83

hey Dakotadave do you know what size led lights I need to get for a 2002 f150 instrument panel I'm trying to switch everything over to LEDs

dakotadave

Fordgirl83, the original post discusses the replacement of instrument cluster lighting in another link...

rlkellenbenz

Let me try to explain this. I have a 2003 F150 Crew Cab XLT 4.6l. I have pulled my cluster out 3 times and tried to change the 6 primary bulbs. 1st try had the wrong bulbs, 2nd try was my issue because I bought the cheap Taiwan bulbs that did not illuminate the dash very well. It had some soft spots on the edges plus I had an issue getting some of the bulbs out of the base. 3rd try I bought the better ones and also bought a package of T5 bases to replace the ones that had the frozen bulbs in them. When i removed the bulbs I damaged the copper tabs inside the base on 2 of them. The T5 bases I bought through superbrightleds.com do not fit into the cluster. They are just slightly bigger than the bases I have. I also bought another set through a different company but they were the same as the ones I recently bought. This is quite frustrating and Ford cannot help me at all. Also mine are black and most of the pictures I see are white bases. Can anyone assist with the correct base/socket part number?

On a good note, I've fixed my Odometer & PRNDL and adjusted it, so it wasn't all in vain.

Thanks for any help you can offer. Ron

cfauvel

FYI - replaced the 1997 underhood light with these and they are super bright...you can't stare at the bulb.

With LED, you have to be cognizant of where the LEDs are located so that you don't get shadows...these fit the bill nicely.

Olb

is it possible to buy 2 whole light boxes from the front doors and use them in the place of the reflectors in the back doors and wire them so they work just like the front ones?