I have an '00 F150 Lariat SC w/the 6cd changer in the console. I want to remove it. How does it come out? I can't seem to find any mounting screws unlike my expeditions.

 

I've seen some people leave the trim on, but I would take off the trim around it, theres 4 clips for that-use something to get a grip on it (slide a flathead or something like that under it) and pop it off, if u have 4x4 switch that and air speed will be plugged to that so dont pull it too far away. I left these plugged in when i removed mine but rested the trim on my knees so that it wasn't hanging by these plugs. After that you need the tools (looks like U's with a little thing at the end) put each end in one of the 4 small holes on the left2 and right2 should go about an inch and feel it lock into place, push the tools to the outside and that will release it-then all you gotta do is pull it straight out. There's gonna be 2 wire plugs to undo and one wire to pull(this took a little force for mine) and then its all out and undone. That should be it.

 

Thanks but I'm talking about the 6cd changer in the console not the dash.

 

Bump

 

I got it out.
Thanks

 

They make set of metal looking to take then out, but you can also use 4 small finishing nails to do the trick. It just pulls the metal clips on the inside back to release the cd player.

 

Thanks but I got it out. It was the changer in the console I was removing not the HU in the dash. I finally figured out how to get the trim off so I could get to the screws.