50" Light bar help
#1
50" Light bar help
I just placed my order for 2 50" light bars from EZ lightbars and I was wondering how people have ran the wires from the roof to the battery, if you have any experience with this and pictures please chip in with tips!
#3
I ran my wiring through the window seal/rain channel. I would highly recommend going this route vs drilling a hole through the roof or RVT ing it down the side of the trim.. Maybe you can see in the picture how i ran it.
#4
so could I just tuck the wires under that weather seal strip and where did you run it into the engine bay?
#5
you can run it through the weather strip on the window. Under it and you might see it, the weather strip basically empties out right at the front fender corner so i just snuck it across. Simple, hidden, and neat.
Last edited by 02_Black_On_White; 02-10-2015 at 08:33 AM.
#6
if you could post a couple pictures that'd be great, just so I can have a reference
#7
Here ya go. You can see if you look close enough in the first picture the wires coming out of the seal.
Trending Topics
#9
I've also seen on here where a few guys took some gmc/Chevy roof brackets for the door jamb and made them work? Could someone help me with that or tell me the guys names so I can ask them about it?
#10
it works on supercrews and single cabs. You'll want 07-13 Chevy 1500 mounts from rough country. They will work without any modification. Here's a pic