gustrider4

Greenheadkiller98, what brand spindles are you using?

gustrider4

I was just looking around on ebay. Have you guys heard of a company called crown suspension that makes spindles? Are they any good?

greenheadkiller98

Mine are made by some company out of arizona, i dont remember the name its been like a year or so. I havent been very nice to them offroad and they still holding up just fine

greenheadkiller98

Yeah on fords as well as chevys. The spindle seems like it is a cast material and the snout where the weel mounts is machined, steel i suppose. Mine were the same way

gustrider4

Is there anything else i need to buy like extended brake lines? ITs going to be about 5in the front and 3.5 in the back.

greenheadkiller98

No everything should bolt right up. It did on mine


The fabtech is more expensive because they are painted blue and say fabtech. They are more than likely the same exact spindle and probably come from the same factory. The same thing could probably be said about all spindles

gustrider4

The first post on this thread said he was having trouble with a caster alignment. He said because he lifted the front 4.5 inches and left the back stock. Is this why he had the problem? And if I put a 5.5in in the front and 4inch bloacks in the back, would I be running into this problem?

greenheadkiller98

Edit: nvm i thought this was a different thread sorry

gustrider4

The first post on this thread said he was having trouble with a caster alignment. He said because he lifted the front 4.5 inches and left the back stock. Is this why he had the problem? And if I put a 5.5in in the front and 4inch bloacks in the back, would I be running into this problem?

gustrider4

Also quick question, what size is a 235/75R16 tire? And what size is a 265/70/R17 tire? Thanks