Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

1997 - How to replace 3rd door cable

Thread Tools
 
Search this Thread
 
Old Sep 28, 2010 | 01:02 PM
  #11  
johnny_walker@fmi.co's Avatar
Junior Member
 
Joined: Sep 2010
Posts: 4
Likes: 0
Default

Thanks a lot to all. You tube would be great but will start with info given.
Reply
Old Sep 7, 2011 | 12:20 PM
  #12  
flashover15's Avatar
Junior Member
 
Joined: Jan 2011
Posts: 2
Likes: 0
Default door panel removal?

so any of you guys remember how you got the door panel off with out breaking the plastic tabs or whatever it is that is holding the door panel on to the metal part of the door? I found some pretty good info on the repair on another ford web sight with some good pics .... tried to post them but guess files are too large..
http://www.fordf150.net/forums/viewt...p?f=71&t=94404

that is the web sight if any one else might need to go look
Reply
Old Jul 8, 2013 | 11:00 AM
  #13  
yankeesfan415's Avatar
Member
 
Joined: Nov 2011
Posts: 32
Likes: 0
Default

I just had the same problem. I just sold my 97 supercab to a friend and the 3rd door was locked up. I figured i would share my my fix for anyone who has this problem in the future. My cable and yellow plastic piece were still in tact. It was the top latch that wasnt working. So i pulled out the plastic "holder" (for lack of better words) and found out that instead of being broke, mine had just stretched out. So i pulled the cable out of the holder, put the holder back on the wire instead of the threaded end piece. Then i stretched out the cable and put 3 zip ties on the end so it would be tighter. Much like the throttle response trick we see on here all the time. I put the "holder" back in its place and it works like a charm
Reply
Old May 23, 2018 | 09:57 AM
  #14  
LTBeck32's Avatar
Junior Member
 
Joined: Jul 2017
Posts: 2
Likes: 0
Default

Partsgeek.com (and others) have FORD Door Latch Cable Repair Kit for third door cable repair kit (DOORMAN 936-111) with aluminum ends to replace FORD plastic ends. Note that one is different size than other three. Be ready to do some swearing and "convincing" them to go into holders with vise grips and large screw driver. I am pretty sure YouTube can walk you through the whole process.
Reply




All times are GMT -4. The time now is 11:37 PM.