*To the Mod's, let me know if you accept the pictures. I failed to get pictures before I wrapped and taped it up. took it out to snap a quick, required picture.*


Removed from my 2013 FX4 w/ Appearance Package. 2-bar/C-bar glossy and has a fresh coat of Collinite 845 wax. Has roughly 15k miles on it. Mainly city driving, no damage to the grille, show's light use. No surround, no hardware. You would use your existing surround and hardware to mount.

$299 + buyer pays shipping (roughly $50-60 due to size, non-negotiable on shipping price). PayPal only, signature required.







*For reference on how it looked on my truck. Truck not for sale.

 

Not the greatest pic, but I personally can tell what it is. It's fine in my book; GLWS!

 

This is only for the center section and not the white surround?

 

correct.

 

Not trying to drop a steamer on the guy's thread, but since it's an insert only a buyer will want to make sure that it'll fit their surround OR that they can/want to get the correct surround to fit it if their won't.

Grille assemblies are not all the same and not all inserts/surrounds are interchangeable with each other. A whole assembly (surround and insert) will swap in most cases. Check the 2009 - 2014 Ford F150 forum for info on what surrounds and inserts will mix.

 

thanks for that. I was under the assumption it fits 09-14? Or are the earlier years a little different?

 

Might or might not, depends on which surround they have, which depends on which trim level they have. I also think the 09 & 10 are completely different.

Two quick checks.
1) How far back does the inner lip of the surround go? 1" or 3/4"? Since I have a C-clamp grille too, I'll bet yours is/was 1".
2) The bottom corners are tighter curved on the 3/4" surrounds than on the 1".

I found all of this trying to get a 2014 STX Sport 6-bar grille on a 2013 STX non-Sport. I bought the whole assembly so I can get the whole mess on my truck, but I'm having to get the Sport surround repainted since the inserts won't swap.

Here's a post listing what surrounds and inserts should swap out. There's also some pictures on page 2 of that thread with pictures of the 1" and 3/4" surrounds.
https://www.f150forum.com/f38/grill-...3/#post4534331

 

Yeah, Id be all over that, but I would need the surround as well. Bummer

 

Look at your grill surround. If the bottom corners of the opening are rounded off just like the top corners, this insert will work. So this will work on king ranch, tremor, and obviously the surround for the xlt chrome version of this same insert.

If the bottom corners are more squared off like on the 2011-12 fx/xlt 6-bar, lariat, and harley/stx sport 6-bar grills, this insert will NOT work.

 

but it came off my FX4.