Ecoboost - Convert Bypass to Blow Off Valve kit
#1
FX4 SCrew TT'd V6
Thread Starter
Ecoboost - Convert Bypass to Blow Off Valve kit
I am putting together some of these kits with left over parts from when I did it.
What I am selling contains:
Qty 2, 1 1/16" ID Caps to cap the re-circulation line going back into the intake.
Qty 4, Stainless steel hose clamps for securing a filter (optional)
Qty 2, 1" ID Automotive Heater hose.
Qty 2 heavy plastic zip-ties to secure caps (though they only ever see vacuum, no boost)
I will sell these kits for $25 shipped.
The picture depicts the whole kit. If you just want the caps you get the two orange caps in the picture.
If you are just wanting the caps I will sell them for $10 shipped.
Engineermike did a great write up on this here:
https://www.f150forum.com/f70/bypass...sphere-170228/
The optional filter he recommended is: (about $46 shipped for two)
http://www.jegs.com/webapp/wcs/store...chTerm=62-1040
I have a lot of caps left over from when I did it so I can make up quite a few of these kits.
Paypal is mrpositraction@gmail.com, just put "blow off valve kit" in the subject.
I can usually mail out within a day or so.
Here are the installed pictures:
You can buy these pieces like listed in the thread from Engineermike, the only problem is you have to buy 25 caps when you only need two.
What I am selling contains:
Qty 2, 1 1/16" ID Caps to cap the re-circulation line going back into the intake.
Qty 4, Stainless steel hose clamps for securing a filter (optional)
Qty 2, 1" ID Automotive Heater hose.
Qty 2 heavy plastic zip-ties to secure caps (though they only ever see vacuum, no boost)
I will sell these kits for $25 shipped.
The picture depicts the whole kit. If you just want the caps you get the two orange caps in the picture.
If you are just wanting the caps I will sell them for $10 shipped.
Engineermike did a great write up on this here:
https://www.f150forum.com/f70/bypass...sphere-170228/
The optional filter he recommended is: (about $46 shipped for two)
http://www.jegs.com/webapp/wcs/store...chTerm=62-1040
I have a lot of caps left over from when I did it so I can make up quite a few of these kits.
Paypal is mrpositraction@gmail.com, just put "blow off valve kit" in the subject.
I can usually mail out within a day or so.
Here are the installed pictures:
You can buy these pieces like listed in the thread from Engineermike, the only problem is you have to buy 25 caps when you only need two.
Last edited by mrpositraction; 02-06-2013 at 08:38 AM.
#5
FX4 SCrew TT'd V6
Thread Starter
LOL, I can send you the empty can
I have been running this for over a week. When I 1st put them on I thought they might be too loud, but actually now I need to listen for them. The pluses are I don't get the popping in the aftermarket intake like I did before. I also get the cool BOV sound outside the truck, it turns heads, especially with the exhaust you can hear the turbos spooling down after letting off the throttle.
I have been running this for over a week. When I 1st put them on I thought they might be too loud, but actually now I need to listen for them. The pluses are I don't get the popping in the aftermarket intake like I did before. I also get the cool BOV sound outside the truck, it turns heads, especially with the exhaust you can hear the turbos spooling down after letting off the throttle.
Last edited by mrpositraction; 02-07-2013 at 03:55 PM.
#7
FX4 SCrew TT'd V6
Thread Starter
Here are some vids from others
http://www.youtube.com/watch?feature...&v=qbdn_QrdmKo
http://db.tt/oGJcinTw
http://www.youtube.com/watch?feature...&v=qbdn_QrdmKo
http://db.tt/oGJcinTw