When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here's an install pic that a customer just sent me.
He will be putting in a set of "blanks" on the right side for now, (until he adds his other lights).
The "EcoBoost" logo has two twin turbos in the laser etched logo.
Here's an install that a customer just sent me. He will be putting in a set of "blanks" on the right side for now, (until he adds his other lights). The "EcoBoost" logo has two twin turbos in the laser etched logo. Any questions, feel free to email me directly at: lethalweapon09@yahoo.com .
Finally got around to getting the panel installed on my 2013 xlt screw, and it looks fantastic! I am very apprehensive about putting holes in my truck, but if I didn't know any better I would just assume the plate was stock as it forms to the head liner perfectly. Installation was very easy, and the instructions that Brett provided with the plate were fantastic for installation and switch wiring. As you can see I have one switch running to a relay to toggle between the stock and train horn. As well as another switch that runs to the relay powering my on board air compressor linked to the horns, and a quick disconnect for airing up tires. I will leave the two blank spots for future applications as I add them to the truck! Brett is a helpful and stand out guy. I highly recommend this plate!
Finally got around to getting the panel installed on my 2013 xlt screw, and it looks fantastic! I am very apprehensive about putting holes in my truck, but if I didn't know any better I would just assume the plate was stock as it forms to the head liner perfectly. Installation was very easy, and the instructions that Brett provided with the plate were fantastic for installation and switch wiring. As you can see I have one switch running to a relay to toggle between the stock and train horn. As well as another switch that runs to the relay powering my on board air compressor linked to the horns, and a quick disconnect for airing up tires. I will leave the two blank spots for future applications as I add them to the truck! Brett is a helpful and stand out guy. I highly recommend this plate!
camduncan13, that looks great!!! Glad I can help & be a part of a great looking mod & helping you also make your truck look great & functional!!
Thank you for your kind words as well!
There's no doubt that this mod is not for the faint of heart..... A replacement headliner can run $1100 or more if I remember correctly.
But with the included template it really does take the guess work out if it.
When I first did mine, I was just as apprehensive. But you are right, it is actually quite easy.
For the record, I also have "blank" cover panels too, if one wants to remove their switch panel in time and/or resell it. It will bolt in the same mounting holes & I can also laser etch a logo on that too, so the next buyer of the truck will not have a big open hole up in the headliner.
Pictures do not do these justice & I think anyone who already has one will say how much better in person these really look!!
Again, thank you!
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
I just stumbled upon this thread, and I'm sold. I've got to have one. My question is this....has anyone done this in a 2015-16? I have a 15 SCREW, without sunroof. If it will work.....I will be ordering one ASAP. Keep up the great work!!!!
I just stumbled upon this thread, and I'm sold. I've got to have one. My question is this....has anyone done this in a 2015-16? I have a 15 SCREW, without sunroof. If it will work.....I will be ordering one ASAP. Keep up the great work!!!!
Hi ccfr.engineer!
Unfortunately these overhead switch panels that are for the OTRATTW & Carling style switches will not work... At least from what I've seen.
Your headliner has about a maximum area of 1 1/2" .... And these style switch panels that use OTRATTW & Carling style switches require 2".
Now... The "original switch panel" (shown in attachment below) may work.
But it will require a shorter new version. I still need to stop by my dealer to confirm all of this & then design it.
If I do see a new switch panel for the 2015 & 2016 13th gen new F150's, I will definitely let all know,... Especially in the 2015 & newer section.
Thanks for inquiring & keep the new gen F150 owners posted!
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
08-31-2016, 07:24 AM
