Topic Sponsor
2009 - 2014 Part Sales

International: Custom Overhead Switch Panels!

Thread Tools
 
Search this Thread
 
Old 10-10-2016, 06:35 AM
  #271  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

Originally Posted by los1011necie
Could you send me paypal request for the 4 switch panel for the OTRATTW style switches. Thanks in advance.

los1011necie@hotmail.com
Hi,
Not a problem. Please email me: lethalweapon09@yahoo.com for your exact order and what services that I can also help complete your switch panel.
I also sell genuine OTRATTW/Carling switches & a 15 conductor color coded power cable.

I also offer a complete set up - all wired up, with the flying leads down at the dash end - completely labeled for easy tap in of your incoming wires.

Some customers may already have switches or extra wiring laying around, so I offer different services to help you in any way I possibly can.
Here's pics of a full wired up 4 switch, switch panel:




__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....

Last edited by KustomFX; 10-10-2016 at 08:46 AM.
The following 2 users liked this post by KustomFX:
Mecha (10-22-2016), MrLunchbox (10-22-2016)
Old 10-21-2016, 02:59 AM
  #272  
Member
 
los1011necie's Avatar
 
Join Date: Jan 2013
Location: Katy, TX
Posts: 39
Received 2 Likes on 2 Posts
Default

Thanks Brett for the switch panel! Install was a breeze and truck looks a lot better!





The following users liked this post:
KustomFX (10-21-2016)
Old 10-21-2016, 07:28 AM
  #273  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

Originally Posted by los1011necie
Thanks Brett for the switch panel! Install was a breeze and truck looks a lot better!





You're quite welcome and thank you!

Wow!! That looks even better installed!!
I always say that pics do NOT do these switch panels justice.
Again, that looks great!
.
-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
The following 2 users liked this post by KustomFX:
Mecha (10-22-2016), MrLunchbox (10-22-2016)
Old 10-31-2016, 07:05 AM
  #274  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

Coming soon.... 2015-2016 new gen F-150's (and will be sold in a different thread).
Due to space limitations, there is not enough room for the OTRATTW/Carling style switches, but the KIC (Keep It Clean) switches work great!!!
Currently in R&D at this moment & have a unit on its way to a new lucky F-150 member that will be helping.

Thank you for all your orders! These switch panels not only look great, classy & custom.... but very functional.

I'll be keeping those year/gen owners updated on the new release.

In the mean time, our 2009-2014 year trucks, again thank you for your orders & glad I can be a part of your awesome switch panels & set up!

Pic of new 2015-2016 switch panel:










__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
Old 11-02-2016, 03:42 AM
  #275  
Senior Member
 
steve392's Avatar
 
Join Date: Oct 2011
Location: Little Ferry, New Jersey
Posts: 926
Received 66 Likes on 60 Posts

Default

Originally Posted by KustomFX
Hi,
Not a problem. Please email me: lethalweapon09@yahoo.com for your exact order and what services that I can also help complete your switch panel.
I also sell genuine OTRATTW/Carling switches & a 15 conductor color coded power cable.

I also offer a complete set up - all wired up, with the flying leads down at the dash end - completely labeled for easy tap in of your incoming wires.

Some customers may already have switches or extra wiring laying around, so I offer different services to help you in any way I possibly can.
Here's pics of a full wired up 4 switch, switch panel:





omg this would make wiring my switches up so easy. i still haven't had time to get them wired back up. grrrrrrr
The following users liked this post:
KustomFX (11-02-2016)
Old 11-02-2016, 06:10 AM
  #276  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

Originally Posted by steve392
omg this would make wiring my switches up so easy. i still haven't had time to get them wired back up. grrrrrrr
Thank you,
Yes, I make it easy & painless

With a completely done wired up switch panel that I send, all one would really need additional is "butt connectors" or other means of tapping into the incoming wiring.

This is your 3 basic wires that most of us will have:
-Ground (all "incoming" ground wires can go to the one ground wire from the power cable ....or any other ground at the dash - just as long as they are all grounded).
Then your 2 others are:
-Power In
-Power Out

And lastly with the lower independent LED on the OTRATTW switches... connect that wire to a dash light circuit or the fuse box on pass side. I tapped mine to fuse#40 which is actually the rear running lights. (They come on the same time your dash lights come on.)

Any questions, feel free to email me at: lethalweapon09@yahoo.com

-Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....

Last edited by KustomFX; 11-02-2016 at 08:32 AM.
Old 11-03-2016, 09:28 PM
  #277  
Senior Member
 
steve392's Avatar
 
Join Date: Oct 2011
Location: Little Ferry, New Jersey
Posts: 926
Received 66 Likes on 60 Posts

Default

Originally Posted by KustomFX
Thank you,
Yes, I make it easy & painless

With a completely done wired up switch panel that I send, all one would really need additional is "butt connectors" or other means of tapping into the incoming wiring.

This is your 3 basic wires that most of us will have:
-Ground (all "incoming" ground wires can go to the one ground wire from the power cable ....or any other ground at the dash - just as long as they are all grounded).
Then your 2 others are:
-Power In
-Power Out

And lastly with the lower independent LED on the OTRATTW switches... connect that wire to a dash light circuit or the fuse box on pass side. I tapped mine to fuse#40 which is actually the rear running lights. (They come on the same time your dash lights come on.)

Any questions, feel free to email me at: lethalweapon09@yahoo.com

-Brett
this is a newer style harness correct, the older one is not as color coded right?
Old 11-03-2016, 10:24 PM
  #278  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

..
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....

Last edited by KustomFX; 11-03-2016 at 10:29 PM.
Old 11-03-2016, 10:26 PM
  #279  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

Originally Posted by steve392
this is a newer style harness correct, the older one is not as color coded right?
That is correct. When I first started these, I had individual "power cables" that were 3 or 4 conductor for each switch.

This new power cable is color coded and has 15 wires in it (20 gauge) and can power up to 6 switches. I started using this new cable approx 4 months ago and quite please with it.

Then I had one of our designers at my work make my schematics to the switch panels that I make so anyone can see & understand which wire is going to which switch - and it's function.... It Just made everything much easier & cleaner plus allowed to label the flying leads too.



-Brett








__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....

Last edited by KustomFX; 11-03-2016 at 10:40 PM.
The following users liked this post:
Mecha (11-05-2016)
Old 11-07-2016, 11:34 PM
  #280  
F150 Owner & Operator

Thread Starter
iTrader: (3)
 
KustomFX's Avatar
 
Join Date: Jun 2015
Location: New Castle, PA
Posts: 865
Received 297 Likes on 202 Posts
Default

I want to thank all of you for the orders from this past weekend and they're shipping out tomorrow.
Thank you! You're going to love them!!

Here is an update on the latest Rockers including a total of: 7 F-150 novelty rockers for the OTRATTW/Carling switches that are now in stock.

I currently only stock the SPST (on/off) switches in 4 LED color choices. All are "Lower Independent LED", which means the lower LED is lit when your dash lights come on.... and your upper LED will come on ONLY when your switch is turned on.

Also available are "blanks" for anyone who wants to add more switches at a later time & these "blanks" simply snap in place to fill the switch hole opening.

Lastly, the rocker removal tool is for easy changing the rockers if you ever decide to change yours out with no fear of damage to the switch.

Any questions, feel free to email me at: lethalweapon09@yahoo.com

Thanks,
Brett

New rocker choices:

.











__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....

Last edited by KustomFX; 11-07-2016 at 11:44 PM.
The following users liked this post:
MrLunchbox (11-08-2016)


Quick Reply: International: Custom Overhead Switch Panels!



All times are GMT -4. The time now is 11:00 PM.