Drivers Side Power Mirrror
I have 1 Power Drivers side mirror. Standard Power Mirror no blinker.
This is not in mint shape.. Its rather beat. The top of the sail is broken off. There is a scratch on the sail by the window. And there is a Rub mark on the top front.
But If keep busting yours off, this will be cheap,,, $30... Plus shipping.
I also have a passenger side but its real junk... no Cap and broken glass. I will give it to you but that would make shipping more..
This is not in mint shape.. Its rather beat. The top of the sail is broken off. There is a scratch on the sail by the window. And there is a Rub mark on the top front.
But If keep busting yours off, this will be cheap,,, $30... Plus shipping.
I also have a passenger side but its real junk... no Cap and broken glass. I will give it to you but that would make shipping more..
Any idea how hard it is to get the mirror out? I only need the mirror. If you're able to figure it out I'll take it. It should also help in shipping. I'll do some checking around as well to see if I can figure out how to remove it.
I just googled it:
1. Position exterior mirror glass in the full UP position.
2. Locate the notch at the bottom of the exterior mirror glass.
3. Release the mirror glass
Insert a long flat head screwdriver in the notch.
Push the screwdriver into the notch until the glass
is released.
Note: If equipped with heated mirrors disconnect the electrical connector from the exterior mirror glass.
Installation:
1. If equipped with heated mirrors, connect the electrical connector to the back of the mirror.
2. Position the exterior mirror glass onto the mirror motor.
3. Place one hand on the back of the exterior mirror housing and hand flat on the exterior mirror glass.
Press the mirror glass in place until fully seated.
With that said, I'll take it. PM sent.
1. Position exterior mirror glass in the full UP position.
2. Locate the notch at the bottom of the exterior mirror glass.
3. Release the mirror glass
Insert a long flat head screwdriver in the notch.
Push the screwdriver into the notch until the glass
is released.
Note: If equipped with heated mirrors disconnect the electrical connector from the exterior mirror glass.
Installation:
1. If equipped with heated mirrors, connect the electrical connector to the back of the mirror.
2. Position the exterior mirror glass onto the mirror motor.
3. Place one hand on the back of the exterior mirror housing and hand flat on the exterior mirror glass.
Press the mirror glass in place until fully seated.
With that said, I'll take it. PM sent.






