Alberta F-150s!!!!!
07-14-2013, 12:58 PM
#1261
Senior Member
Ran into a snag. But I think I have it figured out. I had a wire from the dri side connected directly to positive battery, Dawson and raptor retrofit said I should be connecting wire 1 and 2 together and not connecting it to battery positive. The way I had it set up the dri side was staying on when I hooked the battery back up and wouldn't turn off I believe because it was receiving constant power. Hopefully the mod to the harness ill do tonight works!
07-14-2013, 01:48 PM
#1262
Beer Gut Extraordinaire
custom truck parts in Edmonton... seriously gave me a chubby. 5 mins after walking in the store, had to wait for "something to calm down".
my gf snickered when she realized I wasn't gonna walk anywhere in the store, especially to the counter until it settled down and I took on reality of being there.
my gf snickered when she realized I wasn't gonna walk anywhere in the store, especially to the counter until it settled down and I took on reality of being there.
07-14-2013, 09:54 PM
#1267
Senior Member
Thread Starter
iTrader: (1)
Good stuff guys. I also have some pictures to share. First off a picture of my truck at my buddy's farm a few nights ago. It was parked outside of the shop while we installed an LED light bar on his F-150. Take note of where I had originally mounted the Rigid Duallys.
Two of my "helper" while moving the Rigids.
The Rigid's in their current location. Also two pictures with the hood up showing how I mounted the bracket and how the Rigid's mount to the racket. I used Plasti-Dip to paint the brackets and you can see how it started peeling off when I tightened up the bolts. Some regular black spray paint would have been better to use, so that's the next project on the list. I'm also looking for better ways to "tuck" the rubber shroud in so it doesn't look sloppy.
And lastly while cleaning the interior of my truck this afternoon the safety supervisor was on duty.
Two of my "helper" while moving the Rigids.
The Rigid's in their current location. Also two pictures with the hood up showing how I mounted the bracket and how the Rigid's mount to the racket. I used Plasti-Dip to paint the brackets and you can see how it started peeling off when I tightened up the bolts. Some regular black spray paint would have been better to use, so that's the next project on the list. I'm also looking for better ways to "tuck" the rubber shroud in so it doesn't look sloppy.
And lastly while cleaning the interior of my truck this afternoon the safety supervisor was on duty.
07-14-2013, 10:04 PM
#1269
Senior Member
Good stuff guys. I also have some pictures to share. First off a picture of my truck at my buddy's farm a few nights ago. It was parked outside of the shop while we installed an LED light bar on his F-150. Take note of where I had originally mounted the Rigid Duallys.
Two of my "helper" while moving the Rigids.
The Rigid's in their current location. Also two pictures with the hood up showing how I mounted the bracket and how the Rigid's mount to the racket. I used Plasti-Dip to paint the brackets and you can see how it started peeling off when I tightened up the bolts. Some regular black spray paint would have been better to use, so that's the next project on the list. I'm also looking for better ways to "tuck" the rubber shroud in so it doesn't look sloppy.
And lastly while cleaning the interior of my truck this afternoon the safety supervisor was on duty.
Two of my "helper" while moving the Rigids.
The Rigid's in their current location. Also two pictures with the hood up showing how I mounted the bracket and how the Rigid's mount to the racket. I used Plasti-Dip to paint the brackets and you can see how it started peeling off when I tightened up the bolts. Some regular black spray paint would have been better to use, so that's the next project on the list. I'm also looking for better ways to "tuck" the rubber shroud in so it doesn't look sloppy.
And lastly while cleaning the interior of my truck this afternoon the safety supervisor was on duty.