here's my situation have stock 18x7.5 +44 rims that I'm going to keep. I'm wondering if I can put 1.5 inch wheel spacers on with my factory wheels and tires and not rub on anything? (Before you say anything I've done all my research on wheel spacers and I realize when not done properly they can cause catastrophic issues) i have a 2.5 level

 

I am using a 1.5" wheel spacer running 285/60r20's, with a 1.5" level. Using the stock 2018 20" sport wheels(+44 offset).

I had to slightly trip the OEM fender flares on the bottom corner. So based on what your saying you should be good to go.

 

The 1.5 inch wheel spacers on my stock rims would be the same as a +6 offset rim so would that fit with the 34x11.5?

 

your original post said stock tires. With those you’ll probably rub very minor.

 

yea i realized that im going to put on 285/70/18 nitto ridge grapplers so was wondering if thy would fit. by minor rubbing do you just mean plastic trimming could get rid of it?

 

yeah you’ll most likely have to cut and trim the corners of your fender flares.