Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Need your help guys

Thread Tools
 
Search this Thread
 
Old 06-17-2012, 08:43 PM
  #1  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default Need your help guys

Ok so I bought a 04 F-150 lariat yesterday and the fan does not work for the HVAC. I can turn the fan all the way up but nothing happens. I can hear the ac compressor kick on so I know that's working just the blower fan isn't working. I went to autozone to get the blower motor resistor but when I got back and took mine out I realized I didn't get the right one. Mine has a big heat sink on it and the one I got from autozone is just a flat chip looking thing. I'm gonna get the number off it and call ford tomorrow but I'd like to her your thoughts in case that doesn't fix it. I checked the fuse on the passenger side and it's fine. Also I don't know if this would be felted or not but the timer on the cluster just says 00.00.00 and doesn't do anything. The guy I bought it from said he had his mechanic look at the problem and said it was the driver control module. I got one of them too but it looks like its the kind for a turn **** temp setup. I appreciate any ideas and apologize because I know this has been posted before but I couldnt find a post that really helped me. If you need any other info of the truck let me know.
Old 06-18-2012, 04:17 AM
  #2  
Member
 
rigrat2011's Avatar
 
Join Date: May 2012
Posts: 6,778
Received 68 Likes on 63 Posts
Default

:bump
Old 06-18-2012, 06:32 AM
  #3  
Junior Member
 
ColoradoGreg's Avatar
 
Join Date: Dec 2011
Posts: 9
Likes: 0
Received 6 Likes on 1 Post
Default

I'd start by checking with a meter at he blower motor if you have 12v. That'll let you know where to start. Normally if it's a resistor you'll loose speeds of a motor but full speed will still work. With the auto temp control that may not be the case however.
Old 06-18-2012, 11:43 PM
  #4  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

Ok. Thanks I will look into that.
Old 06-19-2012, 11:05 AM
  #5  
DIY
 
picaflor's Avatar
 
Join Date: Sep 2010
Location: South Florida and NYC part time
Posts: 1,325
Received 11 Likes on 8 Posts

Default

you can also ran the diagnostics for the HVAC, it may tell you something:
https://www.f150forum.com/f4/c-probl...-ideas-157292/
Old 06-19-2012, 11:45 AM
  #6  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

thanks man.

i got the following codes

12 63 Servo Motor Vent Circuit Failure
12 64 didnt find any info on this one.
22 66 Left Side Blend Door Circuit Failure
22 68 Steering Wheel Climate Control Circuit Open
13 42 ECU Is Faulted

Looks like i got some research to do tonight after work, unless someone knows how to fix these and where each part is located.

Last edited by Rider4life350; 06-19-2012 at 12:01 PM.
Old 06-19-2012, 10:03 PM
  #7  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

anyone have these codes before and know how to fix them or at least how much im lookin at?
Old 06-20-2012, 06:11 PM
  #8  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

anybody?
Old 06-20-2012, 07:13 PM
  #9  
Senior Member
 
Rocko1's Avatar
 
Join Date: May 2012
Posts: 157
Received 5 Likes on 5 Posts
Default

Did you check all the fuses? Not just visual, with a probe or multi-meter.
Old 06-21-2012, 12:18 AM
  #10  
Member
Thread Starter
 
Rider4life350's Avatar
 
Join Date: Jun 2012
Posts: 57
Likes: 0
Received 0 Likes on 0 Posts
Default

No. I pulled the fuse and swapped it with another of the same kind and tried that and worked in the other spot and the fan still didnt work. It goes into ford tomorrow after work to find out what's wrong.



Quick Reply: Need your help guys



All times are GMT -4. The time now is 03:18 AM.