what next? iwe(s) still engaged
#1
Senior Member
Thread Starter
what next? iwe(s) still engaged
so ive changed both iwe's along with the solenoid and im still getting a click when coming to a stop intermittently.
is a check valve most likely not seating? when i pull both lines off of the iwe solenoid i can hear built up vacuum release.
is a check valve most likely not seating? when i pull both lines off of the iwe solenoid i can hear built up vacuum release.
#4
Just because you can hear vacuum release doesnt mean its holding good vacuum. Go get a vacuum tester and test your iwe's by themselves, then lines seperately as well. Most parts stores will let you borrow one with a fully refundable deposit.
#5
Senior Member
Thread Starter
ill check the lines.
thanks
#6
These things are the biggest pains in the rear ever. I replaced everything, iwe's, solonoid, and lines. I still get a chatter every once in a while. Especially when the transmission kicks down a gear. I noticed it does it especially around 2500 RPMs. I hope you have better luck than I did. I just came the the point to live with it.
#7
Senior Member
Thread Starter
These things are the biggest pains in the rear ever. I replaced everything, iwe's, solonoid, and lines. I still get a chatter every once in a while. Especially when the transmission kicks down a gear. I noticed it does it especially around 2500 RPMs. I hope you have better luck than I did. I just came the the point to live with it.
did you replace both check valves and vacuum reservoir as well?
Last edited by rick99601; 09-21-2010 at 11:23 PM.