Summers22

iTrader: (2)

I would do the high beam relay. Not sure why yours is different.

elricfate

Sorry bubba, I haven't had a need to do the mod.

BadFish523

Check this write up. I'd just make sure you get right one.

http://www.*****************/threads/bambi-mod.1690/

Not sure why the link won't work. Dang it

casey.mikl

Hopefully I'll be ordering a new set of wheels for the truck. Instead of lift, I'm planning on adding the leveling kit that I have, reinstalling the factory rear block. And adding 20x10s with 33x12.50 tires. Keep it simple and I already have the leveling kit for the front. Does anyone know how to measure the puck to see how much lift it will provide from the front? I'm hoping it's not a 3 inch for the front. I don't want any balljoint issues.

elricfate

Replaced the front speakers with the Rockford punches I got. Took it for a drive to test, there's absolutely a difference in clarity and max volume hurts my ears now. Can't wait to add the back speakers and swap the head unit.

Also scared the hell out of some teenagers who were out at night, walking in the road, against traffic instead of the sidewalk. Came around a blind corner and they were right there about ten feet from the entrance of the road so they surprised me, but they could see my headlights pretty clearly. One of them yelled ahole at me so I stopped, out it in reverse and burned the tires for half a second. They all went scrambling and one girl dropped her phone on the road. I laughed hard. It's on my dashcam in the event they tell their parents a wild story.

04BenFX4

I've done the shift-to-reverse-and-burn-em trick a few times. Works like a charm.

04BenFX4

Today I accidentally knocked a piece of beach glass down my defrost vent. Yes I know that sounds odd, but I NEED to get it back. It has some sentimental value to someone close to me and I can't loose it or she might kill me. Any thoughts on how to get it out?

casey.mikl

Sounds like time to tear the dash apart.. you'll need to get the piping apart. Maybe you'll get lucky and it made it all the way down to the blower motor

Fbcoach

Thanks, guys! I'm going to hold off until I actually get the bulbs and check to see if I need it. If I do, then I'll do it and I'll let y'all know what's up.

BadFish523

Im going to do the Bambi mod this weekend. Been planning it for months now but Im lazy. Getting ready for deer season. I just looked at a manual online and I think you're looking at the wrong relay. R03 is the highbeam but if you go back and look at the link (or your pictures) that was posted you need to go up another row to the smaller grey relay. Relay R202 I believe is the fog lamp relay and that's the one you use. In your pictures your thumb is right on the relay you use Im pretty sure. Like I said I haven't done it yet.