Vater

[QUOTE=isvend;6170536]Are you taking the black up to the tape lines? I like the black/silver look.[/QUOTE
Yeah... I'm trying to figure out.. to I go to the lower line or the higher... I was thinking all black but I like the silver]

isvend

Tough choice... if it were my truck I'd stop at the lower line. Is the hurculiner sprayed or brushed? I've got some paint delaminating and I might try something like this instead of paying a body shop to respray.

Vater

I'm using a roller

dukedkt442

If it were my truck I’d leave it as is, bedliner paint jobs alway look hacked to me. Never understood headlight tint, either. I like seeing at night. Good looking truck nonetheless.

dont slow down

Could be your seat belt buckles. They have a small charge in them that goes off when in a collision, mine went bad, had a the airbag light on for about 6 months before I figured it out. If you have Forscan you can hook it up and look at the resistance values of the buckles and can see if its bad. Fordtechmakulo has a video on youtube about this technique.

OEFVETF150lover

found the leak on the passenger side exhaust manifold, considering an upgrade

Phil48315

Go for it !

Screwed05

Don't think I'd do the equal length. Those tend to be a nightmare.

Vater

diver64

Put the passenger side sway bar linkage on and considered changing out the sway bar bushings but they look ok for now so I'll wait. I got it jacked up to change the tie rods with some I just ordered then my wife said "didn't you already do that"?

Went online and found out I ordered and changed them out last summer. Anyone need a set of inner and outer tie rods?