TPS replacement bolt size
#1
Senior Member
Thread Starter
TPS replacement bolt size
I successfully took the TPS off my 04 F150 4.6 however the PO did a good job of stripping one of the bolts (I was able to remove it by jamming a bigger torx size on it and using my impact). Does anyone know what size and/or where I can buy replacement bolts? I went to O Reillys and came up empty, they suggested Fastenal but I'd like to get lucky and pick one up at Lowes or somewhere.
#2
Mark
iTrader: (1)
Take the other bolt with you to the local hardware store.. Match it up.. If you have a tractor supply close by they have an awesome selection of bolts.
#3
Senior Member
Thread Starter
No Tractor Supply close to me but there is a Lowes. Unfortunately after I posted this I realized my 4.6 was one of the few made at the Windsor plant and therefore uses a different TPS (I should have remembered that since I use the FL 400S oil filter). The TPS for the engines made in the Windsor plant appear to come with new bolts. Hopefully thats the case since it cost $20 more than the other one
Thanks for the feedback though!
Thanks for the feedback though!
#4
Mark
iTrader: (1)
Roger that