Anyone have any good cheap easy ways they have put a light in their toolbox? Any ideas appreciated

 

Cheap way: Battery-powered tap light and some 3M double-sided tape.

Expensive/time consuming way: Wire the tolobox up to an always-hot curcuit with lights and a momentary switch that shuts the lights off when pressed, and put the switch in a place it'll be pressed by the lid.

 

Lowes sells lights for toolboxes in the toolbox section usually

 

nothing cheap and easier than this:



but off course, if you want to do it the right way, usually bring a wire from the battery and get some led light fixture like this:

http://www.superbrightleds.com/cgi-b...ars-rigid.html

 

http://www.theboxlight.com/home/

 

Thanks guys