Danruff93

Here do y'all have y'all's auxiliary switches at

I'm gonna hard wire in my fire lights in. I've got like four switch to wit in and I'm not sure where I should put them

Danruff93

I'm thinking about on the center console right under the ash tray

DrGriffin

The panel that the cigarette lighter is in pulls right off. If you look to the left and right, there are holes allowing wires to pass through in the dash. I installed a switch on each side of the cigarette lighter and snapped to panel back on. Just drilled the holes in the panel piece and mounted switches with no issues.

Danruff93

That looks good I'm gonna try to get the dummy clips or what ever they are called cut off so I can put more on there

Project_Red

I did mine right here!

DrGriffin

I used a handheld rotary tool to remove the dummy clips and smooth out the back of that panel.

Toshbar

I put my 2wd low-range switch in the side of my Edge programmer pod. No cutting to the dash.

Snoopaloop

I put mine here.

Project_Red

I shoulda put that in where I put mine instead of four individual non light up.