Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Studder a low rpm ???

Thread Tools
 
Search this Thread
 
Old Jan 11, 2012 | 04:26 PM
  #1  
MountainManMyke's Avatar
Thread Starter
Member
 
Joined: Dec 2010
Posts: 30
Likes: 1
From: Northern Canada
Default Studder a low rpm ???

i have a 2005 f150 fx4.I have to odd low rpm studder at about 1200 rpm when it kicks down while i drive down the highway. Its couldnt be anything with the transmission because it seems the fuel is cut off and then it picks up again. There are no studder problems at a higher rpm, just at roughly 1200-1500. Thanks
Reply
Old Jan 11, 2012 | 08:03 PM
  #2  
painthorseowner's Avatar
Senior Member
 
Joined: Oct 2011
Posts: 339
Likes: 21
Default

How many miles on it? Sounds like it's time for a tune up.......heaven help you with the spark plugs.........
Reply
Old Oct 10, 2018 | 06:12 PM
  #3  
sctptetwn's Avatar
Junior Member
 
Joined: Feb 2016
Posts: 4
Likes: 0
Default

I have the same problem, 163000 miles and changed the plugs 35000 ago. Of course I did not do the coils at the same time..........Do it all over again and do the coils as well?
Reply
Old Oct 10, 2018 | 07:16 PM
  #4  
SCORGE's Avatar
SSDD
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2016
Posts: 17,606
Likes: 1,619
Default

Originally Posted by sctptetwn
I have the same problem, 163000 miles and changed the plugs 35000 ago. Of course I did not do the coils at the same time..........Do it all over again and do the coils as well?
Check condition of plugs. You can try new boots and springs first, instead of the entire coil. Everything else maintenance wise up to snuff?
Reply
Old Oct 10, 2018 | 08:07 PM
  #5  
sctptetwn's Avatar
Junior Member
 
Joined: Feb 2016
Posts: 4
Likes: 0
Default

Originally Posted by SCORGE
Check condition of plugs. You can try new boots and springs first, instead of the entire coil. Everything else maintenance wise up to snuff?
Yea everything else has been maintained as far as oil, sensor replacements, belt, pulleys, etc. Thanks for the advice.

It would not be the Cam phaser non-sense would it?
Reply




All times are GMT -4. The time now is 09:17 PM.