starting issue
so I was installing my dual battery tray yesterday and when I hooked the battery back up it wouldn't start every thing would power up but noting from the starter I heard a clicking down by the fuse panel so I checked the relay switched it out with another one and still noting the only other thing I could think is the starter solenoid. does any one know where it is on our trucks???
Thanks
Thanks
The starter solinoid is within the starter itself.
Check your connections, as it sounds like they are not tight, or the battery is drained. Clicking indicates there's not a full 12 volts getting to the starter.
Check your connections, as it sounds like they are not tight, or the battery is drained. Clicking indicates there's not a full 12 volts getting to the starter.
I can jump the starter and it will start the clicking is coming from the fuse box on the passenger side floor board I though it was on of the relays but I've swaped them all and still nothing there is a red led on my dash lower left that is blinking it has never been on before does any one no what it is???
$146 later I got it fixed. The jack *** before me had an aftermarket alarm and never took the starter kill switch off but had the rest removed so when I unhooked the battery it reset it. but now i have a new issue which I'm starting a new thread. thanks for the help






