Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

Spark PLugs Second Time Around

Thread Tools
 
Search this Thread
 
Old Mar 2, 2011 | 10:14 AM
  #1  
mattark17's Avatar
Thread Starter
5 Year Member
10 Year Member
 
Joined: May 2010
Posts: 279
Likes: 14
From: Richmond Hill, GA
Default Spark PLugs Second Time Around

I am getting close to the 200k mark and will need to change out the plugs. I was not the owner of the truck when they were done the first time. Is there anyway to tell from looking at the plug if they were replaced with the redesigned plug not the original two piece plug? They are not Champion plugs I know that much. Any thoughts or helpful hints would be appreciated. I promise I will learn from this so when 300k comes around I won't ask again.
Reply
Old Mar 2, 2011 | 12:01 PM
  #2  
Chacka's Avatar
Senior Member
 
Joined: Oct 2010
Posts: 364
Likes: 0
Default

I need to know the same thing too. I am at 172k
Reply
Old Mar 2, 2011 | 12:26 PM
  #3  
brooksy11's Avatar
Awesome
 
Joined: Aug 2010
Posts: 87
Likes: 0
From: Whistler
Default

If you pull one of the plug boots off you should be able to read a part number and/or brand name on the spark plug.
Reply
Old Mar 2, 2011 | 02:21 PM
  #4  
bonez's Avatar
Black & Chrome
 
Joined: Jan 2010
Posts: 330
Likes: 8
From: WV
Default

There aren't any plug boots. It's a coil pack and you can't see the plug by removing the coil pack.
Reply
Old Mar 2, 2011 | 08:55 PM
  #5  
GATORB8's Avatar
Senior Member
15 Year Member
Photogenic
Photoriffic
 
Joined: Dec 2009
Posts: 5,001
Likes: 154
From: Arlington Heights, IL
Default

The only two one piece plugs that may have been available when he did the plug change are the Champions and Brisk Racing. The Brisks would not have lasted that long, and since you say they aren't champions, then they are standard 2 piece plugs.
Reply
Old Mar 3, 2011 | 08:36 AM
  #6  
mattark17's Avatar
Thread Starter
5 Year Member
10 Year Member
 
Joined: May 2010
Posts: 279
Likes: 14
From: Richmond Hill, GA
Default

Well that is disappointing. I was afraid of that. Guess I better start buying gifts for my favorite after hours mechanic.
Reply
Old Mar 3, 2011 | 08:46 AM
  #7  
firefighter's Avatar
Senior Member
 
Joined: Sep 2009
Posts: 217
Likes: 0
Default

If the previous owner changed the plugs and applied the anti seize to them you really should have nothing to worry about. Good luck if he didn't though!
Reply
Old Mar 3, 2011 | 09:01 AM
  #8  
techrep's Avatar
Senior Member
15 Year Member
Veteran: Navy
iTrader: (1)
 
Joined: Jan 2009
Posts: 37,818
Likes: 2,715
From: Va. Beach, VA.
Default

Originally Posted by brooksy11
If you pull one of the plug boots off you should be able to read a part number and/or brand name on the spark plug.

LMAO....plug boot
Reply
Old Mar 3, 2011 | 12:28 PM
  #9  
redrider911's Avatar
Senior Member
 
Joined: Feb 2010
Posts: 462
Likes: 1
From: western ny
Default

Chances are it's still the same plug. Also, the neverseize applied as per the tsb has been found to burn off during combustion so treat the sparkplug removal as if they have never been changed.
Reply




All times are GMT -4. The time now is 10:23 AM.