Shop truck is sick
#1
Senior Member
Thread Starter
Shop truck is sick
2007 acts like air mass meter is not doing it's job.very poor throttle response. No cel. No codes. Scanner says fuel pressure is ok. So I started checking the wiring for the amm. Volt meter says 5.2 going in. Is this correct? Specs I find says it should be 12. If 12 volts is the number where is the loss occurring. Thanks in advance.
#2
Senior Member
Is "amm" ammeter?
#4
Senior Member
What we generally refer to as the MAF - mass air flow sensor.
I was under the impression it should measure around 0.01 V at KOEO and around 1V at idle.
I was under the impression it should measure around 0.01 V at KOEO and around 1V at idle.
The following users liked this post:
SilverSport (03-01-2019)